All public logs

Combined display of all available logs of Filmwerkplaats MediaWiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 11:27, 5 October 2026 EstherUrlus talk contribs created page Buying Guide: Bolex H16 Inspection Checklist (Created page with " === '''1. Model Identification & Valuation''' === * '''Reflex (RX) vs. Non-Reflex:''' * Avoid '''Non-Reflex''' models unless they are under €100 (they are much harder to use for modern filmmaking and there are more lenses and accessories available for RX models) ** '''How to identify a Reflex model:''' *** Look for '''two shafts''' on the side: One for "1 frame" (with a red dot) and one for "8 frames" (for the hand crank). *** Check the '''Viewfinder''': Earlier mode...") Tag: Visual edit
• 09:56, 5 October 2026 EstherUrlus talk contribs created page FWP Bolex H16 Rental Agreement & Safety Terms (Created page with " == 🎥 == '''Please read and check ✅ each box to confirm your understanding and agreement:''' === '''1. Financial Responsibility & Insurance''' === * '''No Insurance:''' I understand that FWP does '''NOT''' provide insurance. I assume full financial responsibility for any loss or damage. * '''Original Condition:''' I will return the camera in its '''original functional and aesthetic state'''. * '''Completeness:''' I will return the '''Take-up Spool''', Filter Holde...") Tag: Visual edit
• 09:49, 5 October 2026 EstherUrlus talk contribs created page Borrowing Cameras and Accessories (Created page with "* Pre-Shooting Checklist *") Tag: Visual edit
• 09:43, 5 October 2026 EstherUrlus talk contribs created page Pre-Shooting Checklist (Created page with " 1. Mechanical & Film Compartment • ▢ Filter Holder: Verify it is IN PLACE. (Crucial: Prevents light leaks through the filter slot). • ▢ Spring Motor: Wind the Spring and run the camera briefly to test. • ▢ Take-up Spindle: Open the Side Door; confirm the spindle rotates while the motor runs. • ▢ Empty Spool: Ensure an empty Daylight Spool is inside for the take-up reel. • ▢ Pressure Plate: Check that it is Closed & Locked sec...")
• 13:50, 10 March 2026 User account Simon.Jarpa talk contribs was created by EstherUrlus talk contribs and password was sent by email
• 19:32, 3 December 2025 EstherUrlus talk contribs created page B&H professional (Created page with "thumb")
• 19:23, 3 December 2025 EstherUrlus talk contribs uploaded File:Richard & Dianna with B&H model C.jpg
• 19:23, 3 December 2025 EstherUrlus talk contribs created page File:Richard & Dianna with B&H model C.jpg
• 14:16, 1 December 2025 EstherUrlus talk contribs uploaded File:B&H model C.jpg
• 14:16, 1 December 2025 EstherUrlus talk contribs created page File:B&H model C.jpg
• 13:53, 1 December 2025 EstherUrlus talk contribs created page B&H model C (Created page with "This printer operates now with a controller that is designed by James Rubery (in accordance with the original manual). This controller is to operate the 3 valves in RGB (red-green-blue light) in 0 to 50 steps each. 0 is closed and 50 is completely open. 12 steps is 1 stop. The gate has the options composite = full image including optical sound outline picture = only the image, no outline framing sound pos = only the optical sound part when printed as positive from a...") Tag: Visual edit: Switched
• 13:15, 1 December 2025 EstherUrlus talk contribs created page Contact printers (Created page with "=Introduction on the (continuous) contact printer at Filmwerkplaats= We have 3 Bell & Howell printers ='''B&H model C'''= ='''B&H model C professional'''= = '''B&H model J'''=")
• 18:01, 9 June 2025 EstherUrlus talk contribs deleted page Emulsions (content was: "wegfaeigfaskzxc", and the only contributor was "Nan" (talk))
• 16:44, 9 June 2025 User account Raluca talk contribs was created by EstherUrlus talk contribs and password was sent by email
• 16:43, 9 June 2025 User account TessaJ talk contribs was created by EstherUrlus talk contribs and password was sent by email